资源类型

期刊论文 71

年份

2023 7

2022 10

2021 8

2020 5

2019 3

2018 2

2016 4

2015 1

2014 4

2013 1

2012 2

2011 2

2010 3

2009 3

2008 3

2007 3

2006 1

2005 2

2004 1

2003 1

展开 ︾

关键词

发展 2

析出强化 2

1) 1

21世纪海上丝绸之路 1

F-B双相钢 1

FRP筋 1

GM(1 1

HSLC钢 1

PBO纤维片材 1

TiC 1

中国 1

中国特色 1

临床医学 1

井壁稳定 1

产业用化纤材料 1

仿生纺丝 1

低成本 1

保压 1

公共卫生 1

展开 ︾

检索范围：

排序： 展示方式：

Effect of bond enhancement using carbon nanotubes on flexural behavior of RC beams strengthened with

《结构与土木工程前沿（英文）》 2022年 第16卷 第1期   页码 131-143 doi: 10.1007/s11709-021-0787-8

摘要： This paper studied the effect of incorporation of carbon nanotubes (CNTs) in carbon fiber reinforced polymer (CFRP) on strengthening of reinforced concrete (RC) beams. The RC beams were prepared, strengthened in flexure by externally bonded CFRP or CNTs-modified CFRP sheets, and tested under four-point loading. The experimental results showed the ability of the CNTs to delay the initiation of the cracks and to enhance the flexural capacity of the beams strengthened with CFRP. A nonlinear finite element (FE) model was built, validated, and used to study the effect of various parameters on the strengthening efficiency of CNTs-modified CFRP. The studied parameters included concrete strength, flexural reinforcement ratio, and CFRP sheet configuration. The numerical results showed that utilization of CNTs in CFRP production improved the flexural capacity of the strengthened beams for U-shape and underside-strip configurations. The enhancement was more pronounced in the case of U-shape than in the case of use of sheet strip covers on the underside of the beam. In case of using underside-strip, the longer or the wider the sheet, the higher was the flexural capacity of the beams. The flexural enhancement of RC beams by strengthening with CNTs-modified CFRP decreased with increasing the rebar diameter and was not affected by concrete strength.

关键词： RC beams     flexural     strengthening     CFRP     CNTs     finite element    

HTML PDF 收藏

Strengthening of reinforced concrete beams using fiber-reinforced cementitious matrix systems fabricated

《结构与土木工程前沿（英文）》   页码 1100-1116 doi: 10.1007/s11709-023-0967-9

摘要： The performance of a new fiber-reinforced cementitious matrix (FRCM) system developed using custom-designed mortar and fabrics is investigated in this study. The behavior of this system is evaluated in terms of both the flexural and shear strengthening of reinforced concrete beams. Eight beams are designed to assess the effectiveness of the FRCM system in terms of flexural strengthening, and four specimens are designed to investigate their shear behavior. The parameters investigated for flexural strengthening are the number of layers, span/depth ratio, and the strengthening method. Unlike previous studies, custom fabrics with similar axial stiffness are used in all strengthening methods in this study. In the shear-strengthened specimens, the effects of the span/depth ratio and strengthening system type (fiber-reinforced polymer (FRP) or FRCM) are investigated. The proposed FRCM system exhibits desirable flexural and shear strengthening for enhancing the load capacity, provides sufficient bonding with the substrate, and prevents premature failure modes. Considering the similar axial stiffness of fabrics used in both FRCM and FRP systems and the higher load capacity of specimens strengthened by the former, cement-based mortar performs better than epoxy.

关键词： fiber-reinforced cementitious matrix     flexural strengthening     shear strengthening     carbon fiber-reinforced polymer     shear span    

HTML PDF 收藏

Performance of insulated FRP-strengthened concrete flexural members under fire conditions

Pratik P. BHATT, Venkatesh K. R. KODUR, Anuj M. SHAKYA, Tarek ALKHRDAJI

《结构与土木工程前沿（英文）》 2021年 第15卷 第1期   页码 177-193 doi: 10.1007/s11709-021-0714-z

摘要： This paper presents the results of fire resistance tests on carbon fiber-reinforced polymer (CFRP) strengthened concrete flexural members, i.e., T-beams and slabs. The strengthened members were protected with fire insulation and tested under the combined effects of thermal and structural loading. The variables considered in the tests include the applied load level, extent of strengthening, and thickness of the fire insulation applied to the beams and slabs. Furthermore, a previously developed numerical model was validated against the data generated from the fire tests; subsequently, it was utilized to undertake a case study. Results from fire tests and numerical studies indicate that owing to the protection provided by the fire insulation, the insulated CFRP-strengthened beams and slabs can withstand four and three hours of standard fire exposure, respectively, under service load conditions. The insulation layer impedes the temperature rise in the member; therefore, the CFRP–concrete composite action remains active for a longer duration and the steel reinforcement temperature remains below 400°C, which in turn enhances the capacity of the beams and slabs.

关键词： concrete beams     concrete slabs     carbon fiber-reinforced polymers     fire resistance     FRP strengthening     repair     retrofitting    

HTML PDF 收藏

Uncertainty of concrete strength in shear and flexural behavior of beams using lattice modeling

《结构与土木工程前沿（英文）》 2023年 第17卷 第2期   页码 306-325 doi: 10.1007/s11709-022-0890-5

摘要： This paper numerically studied the effect of uncertainty and random distribution of concrete strength in beams failing in shear and flexure using lattice modeling, which is suitable for statistical analysis. The independent variables of this study included the level of strength reduction and the number of members with reduced strength. Three levels of material deficiency (i.e., 10%, 20%, 30%) were randomly introduced to 5%, 10%, 15%, and 20% of members. To provide a database and reliable results, 1000 analyses were carried out (a total of 24000 analyses) using the MATLAB software for each combination. Comparative studies were conducted for both shear- and flexure-deficit beams under four-point loading and results were compared using finite element software where relevant. Capability of lattice modeling was highlighted as an efficient tool to account for uncertainty in statistical studies. Results showed that the number of deficient members had a more significant effect on beam capacity compared to the level of strength deficiency. The scatter of random load-capacities was higher in flexure (range: 0.680–0.990) than that of shear (range: 0.795–0.996). Finally, nonlinear regression relationships were established with coefficient of correlation values (R2) above 0.90, which captured the overall load–deflection response and level of load reduction.

关键词： lattice modeling     shear failure     flexural failure     uncertainty     deficiency     numerical simulation    

HTML PDF 收藏

Hybrid flexural components: Testing pre-stressed steel and GFRP bars together as reinforcement for flexural

Mohammed FARUQI, Oved I. MATA, Francisco AGUINIGA

《结构与土木工程前沿（英文）》 2018年 第12卷 第3期   页码 352-360 doi: 10.1007/s11709-017-0453-3

摘要：

Concrete members historically have used either pre-stressed steel or steel bars. In recent years there has been an increased interest in the use of fiber reinforced polymer (FRP) materials. However, the flexure behavior of a hybrid system reinforced by the combination of pre-stressed steel and glass fiber reinforced (GFRP) is still relatively unknown. The purpose of this work is to study this. Two slabs of 100 and 150-millimeter thickness, with a span of 2.1 m reinforced with both pre-stressing steel and GFRP were constructed and tested to failure using ACI 318-11 and ACI 440.1R-15. The concrete had strength of 31 MPa and the slabs were respectively reinforced with 5#4 bars and 3#5 bars. Each slab had 37.41 mm2 prestressing wire with a failure stress of 1722.5 MPa. The experimental flexural strength and deflection of slabs were compared with their respective sizes theoretical slabs. The theoretical slabs were either reinforced with pre-stressed steel or GFRP rebars, or a hybrid system. It was found that the hybrid system produces better results.

关键词： Partial pre-stressing     composite structures     GFRP bars    

HTML PDF 收藏

Analysis of stiffness and flexural strength of a reinforced concrete beam using an invented reinforcement

Nazim Abdul NARIMAN, Martin HUSEK, Ilham Ibrahim MOHAMMAD, Kaywan Othman AHMED, Diyako DILSHAD, Ibrahim KHIDR

《结构与土木工程前沿（英文）》 2021年 第15卷 第2期   页码 378-389 doi: 10.1007/s11709-021-0706-z

摘要： In this study, we conducted experimental tests on two specimens of reinforced concrete beams using a three-point bending test to optimize the flexure and stiffness designs. The first specimen is a reinforced concrete beam with an ordinary reinforcement, and the second specimen has an invented reinforcement system that consists of an ordinary reinforcement in addition to three additional bracings using steel bars and steel plates. The results of the flexure test were collected and analyzed, and the flexural strength, the rate of damage during bending, and the stiffness were determined. Finite element modeling was applied for both specimens using the LS-DYNA program, and the simulation results of the flexure test for the same outputs were determined. The results of the experimental tests showed that the flexural strength of the invented reinforcement system was significantly enhanced by 15.5% compared to the ordinary system. Moreover, the flexural cracks decreased to a significant extent, manifesting extremely small and narrow cracks in the flexure spread along the bottom face of the concrete. In addition, the maximum deflection for the invented reinforced concrete beam decreased to 1/3 compared to that of an ordinary reinforced concrete beam. The results were verified through numerical simulations, which demonstrated excellent similarities between the flexural failure and the stiffness of the beam. The invented reinforcement system exhibited a high capability in boosting the flexure design and stiffness.

关键词： three-point flexure test     softening stage     flexural crack     flexural strain    

HTML PDF 收藏

Effect of size on biaxial flexural strength for cement-based materials by using a triangular plate method

Hakan T TURKER

《结构与土木工程前沿（英文）》 2022年 第16卷 第8期   页码 1017-1028 doi: 10.1007/s11709-022-0871-8

摘要： The effect of size on the biaxial flexural strength (BFS) of Portland cement mortar was investigated by using the recently proposed triangular plate method (TPM). An experimental program was conceived to study the size effect by keeping a constant water-cement ratio of 0.485, cement-sand ratio of 1:2.75, and using unreinforced triangular mortar plates of five different thicknesses and seven different side lengths. The BFS of the produced specimens was tested, and variations of BFS depending on specimen thickness and side length were determined. The results indicated that increases in triangular plate specimen side length and specimen thickness led to a decrease in the BFS of Portland cement mortar. The effect of specimen length increase on BFS was more significant than on the effect of the specimen thickness. The variations in specimens’ thickness indicated a deterministic Type I size effect, while the variations in specimens’ length showed an energetic-statistical Type I size effect.

关键词： testing     apparatus & methods     plain concrete     tensile properties     biaxial flexural strength     triangular plate method    

HTML PDF 收藏

An experimental study on the flexural behavior of heavily steel reinforced beams with high-strength concrete

Yasser SHARIFI, Ali Akbar MAGHSOUDI

《结构与土木工程前沿（英文）》 2014年 第8卷 第1期   页码 46-56 doi: 10.1007/s11709-014-0237-y

摘要： In recent years, an emerging technology termed high-strength concrete (HSC) has become popular in construction industry. Present study describes an experimental research on the behavior of high-strength concrete beams in ultimate and service state. Six simply supported beams were tested, by applying comprising two symmetric concentrated loads. Tests are reported in this study on the flexural behavior of high-strength reinforced concrete (HSRC) beams made with coarse and fine aggregate together with Microsilica. Test parameter considered includes effect of being compressive reinforcement. Based on the obtained results, the behavior of such members is more deeply reviewed. Also a comparison between theoretical and experimental results is reported here. The beams were made from concrete having compressive strength of 66.81–77.72 N/mm and percentage reinforcement ratio ( / ) in the range of 0.56% – 1.20%. The ultimate moment for the tested beams was found to be in a good agreement with that of the predicted ultimate moment based on ACI 318-11, ACI 363 and CSA-04 provisions. The predicted deflection based classical formulation based on code provisions for serviceability requirements is found to underestimate the maximum deflection of HSC reinforced beams at service load.

关键词： high-strength concrete (HSC) members     flexural behavior     reinforced concrete     experimental results     ultimate moment    

HTML PDF 收藏

The ITZ microstructure, thickness, porosity and its relation with compressive and flexural strength of

《结构与土木工程前沿（英文）》 2022年 第16卷 第2期   页码 191-201 doi: 10.1007/s11709-021-0792-y

摘要： A new insight into the interfacial transition zone (ITZ) in cement mortar specimens (CMSs) that is influenced by cement fineness is reported. The importance of cement fineness in ITZ characterizations such as morphology and thickness is elucidated by backscattered electron images and by consequences to the compressive (Fc) and flexural strength (Ff), and porosity at various water/cement ratios. The findings indicate that by increasing the cement fineness the calcium silicate hydrate formation in the ITZ is favored and that this can refine the pore structures and create a denser and more homogeneous microstructure. By increasing cement fineness by about 25% of, the ITZ thickness of CMSs was reduced by about 30% and Fc was increased by 7%–52% and Ff by 19%–40%. These findings illustrate that the influence of ITZ features on the mechanical strength of CMSs is mostly related to the cement fineness and ITZ microstructure.

关键词： cement fineness     interfacial transition zone     compressive and flexural strength    

HTML PDF 收藏

一类新的强化缓冲算子及其数值仿真

崔杰,党耀国,刘思峰,谢乃明

《中国工程科学》 2010年 第12卷 第2期   页码 108-112

摘要：

根据新信息优先利用原理，在已有强化缓冲算子研究的基础上，构造一类新的强化缓冲算子，同时研究了它们的一些特性，克服了原有强化缓冲算子对序列新信息利用不够充分的缺陷，有效地解决了冲击扰动数据序列在建模型预测过程中常常出现的定量预测结果与定性分析结论不符的问题,算例仿真表明：与已有强化算子相比，这类新的强化缓冲算子显著地提高了GM(1,1)模型的预测精度。

关键词： 算子     强化缓冲算子     几何平均强化算子     GM(1     1)    

HTML PDF 收藏

Enhanced empirical models for predicting the drift capacity of less ductile RC columns with flexural,

Mohammad Reza AZADI KAKAVAND, Reza ALLAHVIRDIZADEH

《结构与土木工程前沿（英文）》 2019年 第13卷 第5期   页码 1251-1270 doi: 10.1007/s11709-019-0554-2

摘要： Capacity of components subjected to earthquake actions is still a widely interesting research topic. Hence, developing precise tools for predicting drift capacities of reinforced concrete (RC) columns is of great interest. RC columns are not only frequently constructed, but also their composite behavior makes the capacity prediction a task faced with many uncertainties. In the current article, novel empirical approaches are presented for predicting flexural, shear and axial failure modes in RC columns. To this aim, an extensive experimental database was created by collecting outcomes of previously conducted experimental tests since 1964, which are available in the literature. It serves as the basis for deriving the equations for predicting the drift capacity of RC columns by different regression analyses (both linear with different orders and nonlinear). Furthermore, fragility curves are determined for comparing the obtained results with the experimental results and with previously proposed models, like the ones of ASCE/SEI 41-13. It is demonstrated that the proposed equations predict drift capacities, which are in better agreement with experimental results than those computed by previously published models. In addition, the reliability of the proposed equations is higher from a probabilistic point of view.

关键词： flexural-shear-axial failure     drift capacity     reinforced concrete columns     statistical analysis     fragility curves    

HTML PDF 收藏

Experimental study on flexural behavior of ECC/RC composite beams with U-shaped ECC permanent formwork

Zhi QIAO, Zuanfeng PAN, Weichen XUE, Shaoping MENG

《结构与土木工程前沿（英文）》 2019年 第13卷 第5期   页码 1271-1287 doi: 10.1007/s11709-019-0556-0

摘要： To enhance the durability of a reinforced concrete structure, engineered cementitious composite (ECC), which exhibits high tensile ductility and good crack control ability, is considered a promising alternative to conventional concrete. However, broad application of ECC is hindered by its high cost. This paper presents a new means to address this issue by introducing a composite beam with a U-shaped ECC permanent formwork and infill concrete. The flexural performance of the ECC/RC composite beam has been investigated experimentally with eight specimens. According to the test results, the failure of a composite beam with a U-shaped ECC formwork is initiated by the crushing of compressive concrete rather than debonding, even if the surface between the ECC and the concrete is smooth as-finished. Under the same reinforcement configurations, ECC/RC composite beams exhibit increases in flexural performance in terms of ductility, load-carrying capacity, and damage tolerance compared with the counterpart ordinary RC beam. Furthermore, a theoretical model based on the strip method is proposed to predict the moment-curvature responses of ECC/RC composite beams, and a simplified method based on the equivalent rectangular stress distribution approach has also evolved. The theoretical results are found to be in good agreement with the test data.

关键词： engineered cementitious composite (ECC)     durability     ECC/RC composite beam     permanent formwork     flexural performance     theoretical method    

HTML PDF 收藏

Shear strength model of the reinforced concrete beams with embedded through-section strengthening bars

Linh Van Hong BUI; Phuoc Trong NGUYEN

《结构与土木工程前沿（英文）》 2022年 第16卷 第7期   页码 843-857 doi: 10.1007/s11709-022-0834-0

摘要： In this study, finite element (FE) analysis is utilized to investigate the shear capacity of reinforced concrete (RC) beams strengthened with embedded through-section (ETS) bars. Effects of critical variables on the beam shear strength, including the compressive strength of concrete, stiffness ratio between ETS bars and steel stirrups, and use of ETS strengthening system alone, are parametrically investigated. A promising method based on the bond mechanism between ETS strengthening and concrete is then proposed for predicting the shear resistance forces of the strengthened beams. An expression for the maximum bond stress of the ETS bars to concrete is developed. This new expression eliminates the difficulty in the search and selection of appropriate bond parameters from adhesion tests. The results obtained from the FE models and analytical models are validated by comparison with those measured from the experiments. Consequently, the model proposed in this study demonstrates better performance and more accuracy for prediction of the beam shear-carrying capacity than those of existing models. The results obtained from this study can also serve researchers and engineers in selection of the proper shear strength models for design of ETS-strengthened RC beams.

关键词： embedded through-section     strengthening     fiber-reinforced polymer     finite element     shear strength model     bond mechanism    

HTML PDF 收藏

STRENGTHENING NON-POINT SOURCE POLLUTION CONTROL TO PROMOTE AGRICULTURAL GREEN DEVELOPMENT

《农业科学与工程前沿（英文）》 2023年 第10卷 第4期   页码 503-509 doi: 10.15302/J-FASE-2023528

摘要：

STRENGTHENING NON-POINT SOURCE POLLUTION CONTROL TO PROMOTE AGRICULTURAL GREEN DEVELOPMENT

关键词： GREEN     AGRICULTURAL     PROMOTE     POLLUTION     SOURCE     DEVELOPMENT     POINT     STRENGTHENING     CONTROL    

HTML PDF 收藏

Experimental flexural behavior of SMA-FRP reinforced concrete beam

Adeel ZAFAR, Bassem ANDRAWES

《结构与土木工程前沿（英文）》 2013年 第7卷 第4期   页码 341-355 doi: 10.1007/s11709-013-0221-y

摘要： The most critical drawback in currently used steel reinforcement in reinforced concrete (RC) structures is susceptibility to accumulation of plastic deformation under excessive loads. Many concrete structures due to damaged (yielded) steel reinforcement have undergone costly repairs and replacements. This research presents a new type of shape memory alloy (SMA)-based composite reinforcement with ability to withstand high elongation while exhibiting pseudo-elastic behavior. In this study, small diameter SMA wires are embedded in thermoset resin matrix with or without additional glass fibers to develop composite reinforcement. Manufacturing technique of new proposed composite is validated using microscopy images. The proposed SMA-FRP composite square rebars are first fabricated and then embedded in small scale concrete T-beam. 3-point bending test is conducted on manufactured RC beam using a cyclic displacement controlled regime until failure. It is found that the SMA-FRP composite reinforcement is able to enhance the performance of concrete member by providing re-centering and crack closing capability.

关键词： re-centering     shape memory alloys     concrete     composite     fiber reinforced polymer     scanning electron microscopy    

HTML PDF 收藏

标题 作者 时间 类型 操作

Effect of bond enhancement using carbon nanotubes on flexural behavior of RC beams strengthened with

期刊论文

Strengthening of reinforced concrete beams using fiber-reinforced cementitious matrix systems fabricated

期刊论文

Performance of insulated FRP-strengthened concrete flexural members under fire conditions

Pratik P. BHATT, Venkatesh K. R. KODUR, Anuj M. SHAKYA, Tarek ALKHRDAJI

期刊论文

Uncertainty of concrete strength in shear and flexural behavior of beams using lattice modeling

期刊论文

Hybrid flexural components: Testing pre-stressed steel and GFRP bars together as reinforcement for flexural

Mohammed FARUQI, Oved I. MATA, Francisco AGUINIGA

期刊论文

Analysis of stiffness and flexural strength of a reinforced concrete beam using an invented reinforcement

Nazim Abdul NARIMAN, Martin HUSEK, Ilham Ibrahim MOHAMMAD, Kaywan Othman AHMED, Diyako DILSHAD, Ibrahim KHIDR

期刊论文

Effect of size on biaxial flexural strength for cement-based materials by using a triangular plate method

Hakan T TURKER

期刊论文

An experimental study on the flexural behavior of heavily steel reinforced beams with high-strength concrete

Yasser SHARIFI, Ali Akbar MAGHSOUDI

期刊论文

The ITZ microstructure, thickness, porosity and its relation with compressive and flexural strength of

期刊论文

一类新的强化缓冲算子及其数值仿真

崔杰,党耀国,刘思峰,谢乃明

期刊论文

Enhanced empirical models for predicting the drift capacity of less ductile RC columns with flexural,

Mohammad Reza AZADI KAKAVAND, Reza ALLAHVIRDIZADEH

期刊论文

Experimental study on flexural behavior of ECC/RC composite beams with U-shaped ECC permanent formwork

Zhi QIAO, Zuanfeng PAN, Weichen XUE, Shaoping MENG

期刊论文

Shear strength model of the reinforced concrete beams with embedded through-section strengthening bars

Linh Van Hong BUI; Phuoc Trong NGUYEN

期刊论文

STRENGTHENING NON-POINT SOURCE POLLUTION CONTROL TO PROMOTE AGRICULTURAL GREEN DEVELOPMENT

期刊论文

Experimental flexural behavior of SMA-FRP reinforced concrete beam

Adeel ZAFAR, Bassem ANDRAWES

期刊论文